316L 230mm 5 Mtr kit. Top quality twin wall flexible liner made by Schiedel Rite Vent

If you are keeping the existing chimney system as it is during installation you will want the following kit components
Kit A:
1x Registered Plate Adaptor to Flexible liner
1x Pot Hanger with Straps

If you are removing your chimney pot for installation you will need the following kit components
Kit B:
1x Registered Plate Adaptor to Flexible liner
1x Top Clamp
1x Top Insert
1x Top Plate

Schiedel Rite Vent Flexible Multifuel Flue Liner

Tecnoflex (Turboflex Plus) is a twin skin flexible chimney liner designed for multifuel, where the maximum flue gas temperature does not exceed 600°C. Diameter range 100 - 400mm.

CE Approved - T450 N1 W V2 L50012 G
0-12mm Thick 316 twin skin stainless steel construction

Application Stainless steel flexible flue liners are designed for lining an existing flue or masonry chimney. Multifuel flexible is a twin skin chimney liner designed for gas, oil and multifuel, where the maximum flue gas temperature does not exceed 600°C. There are two grades available, 316L and a higher grade of 904L which is suitable for the extreme conditions found with coal based solid fuel installations.

~ 316 or 904 grade stainless steel twin skin construction
~ For use inside masonry chimneys only
~ Residential and commercial installations
~ Class 1 multi fuel applications
~ Diameters from 80mm to 405mm
~ CE Approved to BSEN 1856-2
~ HEPTAS Approved

Product Description; Both inner and outer layers are made from corrosion-resistant 316L stainless steel. 904L stainless steel is also available as an option for the extreme conditions found with coal based solid fuel installations. Corrugated outer skin for high crush resistance. Smooth inner skin resists corrosive attack due to easy drain down of condensate, less opportunity for soot collection and smooth surface for ease of sweeping. Inner skin remains overlapping to protect the joint from corrosion penetration even at minimum bending radius. Inner skin remains smooth and protective even after the rigours of installation.

Approvals Wonderflex and Triplelock are both tested and Kitemarked to BS715:1993 in diameters l00, 125 and l50mm. Turboflex Plus, Wonderflex and Triplelock (Flexrite) are approved by HETAS and by CSTB (France) in diameters 125 to 200mm. All Rite-Vent flexible flue liners are manufactured under the stringent requirements of BS EN ISO 9001 - 2000 Quality management scheme. Turboflex Plus is tested and approved by TÃœV to EN 1856-1.